Ostwald Process Overview - Industrial Ammonia Production

Nitric acid (HNO3), also known as “spirit of niter,” is a very strong acid.

Between 75-80% of industrial nitric acid is used as a raw material in the production of fertilizer.

It is also used in niche industries such as rocket fuel, woodworking (where it is used to artificially age wood) and cleaning stainless steel. It remains an important chemical, however, in the laboratory as it is used as an analytical reagent.

Nitric Acid

The Ostwald Process

The Ostwald process is the procedure for making nitric acid.

It was patented in by Wilhelm Ostwald, a Nobel Prize–winning German chemist.

Curiously enough, invention of the Ostwald process is usually credited by academic historians to Charles Frédéric Kuhlmann, who devised the reactions used in the Ostwald process.

Also, the time of invention itself is not believed to be but instead. It is said that the then-increasing demands for ammonia and the subsequent completion of the Haber–Bosch process for creating led Ostwald to refine and commercialize the process.

Alternatively, other historians claim that the six-year duration was simply the time it took between the filing of the patent and its granting to Ostwald.

At any rate, both the Haber–Bosch and Ostwald process would prove indispensable to Germany’s war effort as it entered World War I and domestic demand for fertilizers (an ammonia-based product) and explosives (of which nitric acid is a primary component) surged.

The Ostwald process works by converting ammonia into nitric acids in two stages.

Stage One

The first stage involves oxidizing oxygen by heating at a temperature range of 780 to 950 °C (1436 to 1742 °F) and pressure of 1.4 MPa (14 atm).

This reaction is done in the presence of a 10-percent rhodium platinum gauze catalyst. The reaction is highly exothermic (ΔH = −950 kJ/mol), and produces nitric oxide as follows: 4 NH2 + 5 O2 → 4 NO + 6 H2O

The heat produced from the reaction further oxidizes the nitric oxide into nitrogen dioxide. 2 NO + O2 → 2 NO2

As both reactions are exothermic—the second oxidation reaction has a slightly lower heat of reaction of −117 kJ/mol, but it is still heat-producing nonetheless—it is normal for operating temperatures to eventually exceed the recommended 780–950 °C (1436–1742 °F) range.

One must take in mind that both oxidation reactions presented above are reversible, and shifting the equilibrium in favor of the products side can be achieved by cooling. This is done by passing the gasses through a heat exchanger.

Stage Two

By the second stage, the nitrogen dioxide produced from oxidation is readily soluble in water. Nitrogen dioxide is immediately converted into nitric acid as follows: 3 NO2+ H2O → 2 NHO3+NO

As you can see, nitric oxide is again produced, this time during the production of nitric acid. This nitric acid is collected and recycled for reoxidation using the same reaction.

In cases where the second stage is conducted in air (as opposed to nitrogen dioxide being absorbed by water), the following reaction prevails: NO2+ O2+2 H2O → 4 NHO3

Ostwald Process

The above flow chart is a very simplified and generalized view of the ostwald process - in reality there is a large amount of heat recovery and other streams involved.

Overall yield of the Ostwald process is pegged at 93 to 98 percent.

This rate is significantly reduced in the event that the following unfavorable side reaction occurs: 4 NH3+ 6 NO → 5 N2+6 H2O

In this reaction, no nitric acid is produced.

To make things worse, ammonia is reconverted into atmospheric nitrogen.

This is due to the gas mixture (ammonia and nitric oxide) interacting in the presence of the platinum-based gauze catalyst. The catalyst adsorbs ammonia and causes it to react with atmospheric oxygen. This causes ammonia to lose its hydrogen atoms (dehydrogenization) and to dimerizate into atmospheric nitrogen.

Product-selectivity in favor of nitric oxide can be promoted by diluting the amount of nitrogen atoms with respect to the amount of oxygen atoms. This in turn forces much of the catalyst-adsorbed nitrogen atoms to react with ambient oxygen atoms instead of dimerizating with other nitrogen atoms.

In other words, increasing the concentration of atmospheric oxygen produces higher nitric oxide (and thus nitric acid) yields.

Likewise, another unfavorable by-product, nitrous oxide (N2O), may be produced by a side reaction between catalyst-adsorbed dehydrogenated ammonia (i.e. bare nitrogen atoms) and nitric oxide: 2 NH3+ 2 O2 → N2O+3 H2O

The production of nitrous oxide can be prevented by simply increasing the temperature of the catalyst in order to accelerate the desorption velocity of nitric oxide, thus allowing it to become reoxidized in the air using the second reaction from the first stage, instead of reacting with other catalyst-adsorbed nitrogen atoms.

Either unfavorable side reactions can be averted by minimizing the time of contact between the gases involved.

Increasing the concentration of the nitric acid product can be done through distillation—that is passing the nitric acid vapor over concentrated sulfuric acid. As the sulfuric acid is aqueous and is more acidic than nitric acid, the former acts as a dehydrating agent for the later.

The end result is a highly concentrated nitric acid solution.

No comments